Delay With Value (LogiX node)

Delay with value
Inputs
	Impulse	Trigger
	Float	Delay
	dummy	Value
Outputs
	Impulse	Impulse
	Impulse	OnTrigger
	dummy	DelayedValue

The Delay with value node is used to fire an impulse from Impulse after Delay seconds have elapsed following an impulse received at Trigger. Additionally a value can be stored over the delay.

Usage

The Delay input sets the number of seconds which must elapse before the delayed impulse is fired from Impulse. The default value is 0 which results in a delay of 1 frame update.

The Value input value at the moment an impulse is received at Trigger is stored. When the node is spawned from the node browser this accepts a 'dummy' datatype, however the node will overload to accept any specific input datatype when a wire is connected.

The OnTrigger output fires an impulse immediately after an impulse is received at Trigger. This continues the impulse chain which arrived at Trigger.

The DelayedValue output provides the value at the Value input when the delayed impulse was queued. This is only available for the duration of the impulse chain started by Impulse.

The delayed impulses do not continue the impulse chain which arrived at Trigger and any temporary values, other than that the single stored value will be lost. Each impulse which arrives at Trigger sets up a separate delayed impulse with corresponding stored value and multiple can be queued at once with different delay durations and stored values.

Node Menu

Flow
Back	Events	Boolean Latch	Delay	Delay With Value	Dynamic Impulse Receiver	Dynamic Impulse Receiver With Value`1
Dynamic Impulse Trigger	Dynamic Impulse Trigger With Value`1	Fire On Change	Fire On False	Fire On True	Fire While True	For
If	Impulse Demultiplexer	Impulse Multiplexer	Local Fire On Change`1	Local Fire On False	Local Fire On True	Local Impulse Timeout
Local Leaky Impulse Bucket	One Per Frame	Pulse Random	Sequence	Timer	Update	Updates Delay
Updates Delay With Value	While