Dynamic Impulse Trigger With Value`1 (LogiXノード)
Dynamic Impulse Trigger With Value`1ノードは、トリガーの入力TargetHierarchy下に存在する全てのDynamic Impulse Receiver With Value`1ノードをトリガーします。これは、トリガとレシーバのタグ文字列入力が同一の場合にのみ発生します。また、入力と出力のValuesのデータタイプも一致する必要があります。
Inputs & Outputs
Color | Label | Type |
Run | Impulse | |
Tag | String | |
TargetHierarchy | Slot | |
ExcludeDisabled | Boolean | |
Value | dummy |
The OnTriggered
output fires an impulse after any impulse chains triggered from Dynamic Impulse Receiver With Value`1 nodes have completed. This continues the impulse chain which arrived at Run
Note that the tag system for dynamic impulse triggers / receivers is completely unrelated to slot tag properties. When an impulse is received at Run
, this node starts a descending search for any Dynamic Impulse Receiver With Value`1 nodes present under the TargetHierarchy
whose Value
datatype matches that of the trigger. All such receiver nodes with Tag
inputs matching the trigger Tag
will fire an impulse. Note that Dynamic Impulse Receiver nodes will be ignored. The hierarchy search is highly efficient, however it is best to set the input TargetHierarchy
as close to the intended target node as possible to minimize performance costs.
Color | Label | Type |
OnTriggered | Impulse |
使用方法
なお、ダイナミックインパルストリガー/レシーバーのタグシステムは、スロットタグのプロパティとは全く関係ないことに注意してください。Runでインパルスが受信されると、このノードはTargetHierarchyの下に存在するDynamic Impulse Receiver With Value`1ノードの降順検索を開始します。レシーバーノードはすべて、トリガーされたTagにマッチするTagとValueデータタイプにマッチするValueを持っている場合のみ、インパルスを発射する。階層検索は非常に効率的ですが、パフォーマンスコストを最小限に抑えるためには、入力のTargetHierarchyを意図したターゲットノードにできるだけ近づけることが最善です。このノードのValue入力は、生成時には設定されていないダミーのデータタイプを持っていますが、有効な入力が接続されると再設定されます。