Dynamic Impulse Receiver With Value`1 (LogiXノード)
The Dynamic Impulse Receiver With Value`1 node fires an impulse whenever a Dynamic Impulse Trigger With Value`1 is triggered and the receiver node is present under the trigger's TargetHierarchy. This will only occur if the Tag string inputs of the trigger and receiver are identical. The Value output by the receiver node is equal to the Value input of the trigger node at the time it was triggered.
Inputs & Outputs
Color | Label | Type |
Tag | String |
Color | Label | Type |
Impulse | Impulse | |
Value | dummy |
Usage
Note that the tag system for dynamic impulse triggers / receivers is completely unrelated to slot tag properties. This node will only respond to Dynamic Impulse Trigger With Value`1 nodes - it ignores Dynamic Impulse Trigger nodes. The output Value is only equal to the Value input from the trigger for the duration of the Impulse chain started from the receiver.
When spawning this node from the node browswer there is a selection of possible datatypes for this node. See this tutorial by ProbablePrime for how to create receiver nodes for other data types.