Difference between revisions of "Delay With Value (LogiX node)/ko"
(Created page with "Delay With Value (로직스 노드)") |
(Created page with "'''Delay with value'''노드는 <code>Trigger</code>에 임펄스가 입력된 뒤 <code>Delay</code>초 뒤에 임펄스를 발생시키는데 쓰입니다. 추가적으로,...") |
||
Line 11: | Line 11: | ||
}} | }} | ||
− | + | '''Delay with value'''노드는 <code>Trigger</code>에 임펄스가 입력된 뒤 <code>Delay</code>초 뒤에 임펄스를 발생시키는데 쓰입니다. 추가적으로, 지연 시간을 넘어 값을 전달할 수 있습니다. | |
== Usage == | == Usage == |
Revision as of 13:19, 12 April 2022
Delay with value | ||
---|---|---|
Inputs | ||
Impulse | Trigger | |
Float | Delay | |
dummy | Value | |
Outputs | ||
Impulse | Impulse | |
Impulse | OnTrigger | |
dummy | DelayedValue |
Delay with value노드는 Trigger
에 임펄스가 입력된 뒤 Delay
초 뒤에 임펄스를 발생시키는데 쓰입니다. 추가적으로, 지연 시간을 넘어 값을 전달할 수 있습니다.
Usage
The Delay
input sets the number of seconds which must elapse before the delayed impulse is fired from Impulse
. The default value is 0 which results in a delay of 1 frame update.
The Value
input value at the moment an impulse is received at Trigger
is stored. When the node is spawned from the node browser this accepts a 'dummy' datatype, however the node will overload to accept any specific input datatype when a wire is connected.
The OnTrigger
output fires an impulse immediately after an impulse is received at Trigger
. This continues the impulse chain which arrived at Trigger
. If a user focuses a different world while they have delayed impulses queued, the delayed impulses will fire as normal. However, if a user with delayed impulses leave the world entirely, their delayed impulses will never fire.
The DelayedValue
output provides the value at the Value
input when the delayed impulse was queued. This is only available for the duration of the impulse chain started by Impulse
.
The delayed impulses do not continue the impulse chain which arrived at Trigger
and any temporary values, other than that the single stored value will be lost. Each impulse which arrives at Trigger
sets up a separate delayed impulse with corresponding stored value and multiple can be queued at once with different delay durations and stored values.