Difference between revisions of "Tips & Tricks"
Jump to navigation
Jump to search
Line 4: | Line 4: | ||
Example: Select 'Fly' on the left controller and 'Slide' on the right controller. | Example: Select 'Fly' on the left controller and 'Slide' on the right controller. | ||
+ | |||
+ | |||
+ | '''Fast Flying Mode''' | ||
+ | |||
+ | If both controller are in 'Fly' mode then you can fly with twice the speed. | ||
Revision as of 12:23, 12 August 2018
Use two Locomotion Styles
Each controller can have it a different locomotion style active.
Example: Select 'Fly' on the left controller and 'Slide' on the right controller.
Fast Flying Mode
If both controller are in 'Fly' mode then you can fly with twice the speed.
Open Inspector for Referenced Component
When the inspector is displayed click on the small vertical arrow symbol on the left of a reference. This will open up an inspector for the referenced component. The same action can also be triggered by grabbing a reference (shown in blue) and pressing the secondary action on the controller.
Example: Open the inspector for a referenced material.