Difference between revisions of "Face and Eye Tracking (Troubleshooting)/ja"
(Created page with "==シェイプキーとセットアップ== アバターが機能したら、アバターの設定に関するガイドをご覧ください。 (これはまだありませ...") |
(Updating to match new version of source page) |
||
Line 17: | Line 17: | ||
[[File:USBC_USBAdapter.jpg|250px|A USB-C to USB Adapter]] | [[File:USBC_USBAdapter.jpg|250px|A USB-C to USB Adapter]] | ||
+ | |||
+ | == Face Tracker Mounting == | ||
+ | |||
+ | For non-vive headsets, users have been sharing all sorts of mounting options. A short list of these is supplied below for reference. | ||
+ | |||
+ | * '''Tape''' - Lots of tape and the Tracker sticks quite well. Any tape works. | ||
+ | * '''Double Sided Velcro Tape''' - This provides a removable mounting option. Make sure it is heavy duty so it can support the weight of the tracker and the movement of your head. | ||
+ | * 3D Printing | ||
+ | ** '''[https://www.thingiverse.com/thing:4798891 Simple Mount]''' - A simple mount that can be stuck to the bottom of the headset with tape. | ||
+ | ** '''[https://www.thingiverse.com/thing:4806854 Friction Mount]''' - A mount that uses friction/clips between the mount and the Valve Index Frunk. This can fail if you are moving your head around too vigorously. | ||
+ | ** '''[https://www.thingiverse.com/thing:4807214 Magnetic Mount]''' - Uses the existing Valve Index Frunk Cover's Magnets to stick to the headset. This one will require magnets with the following dimensions: 1/8" dia. x 1/8" thick. Stuck to the print. | ||
Revision as of 08:53, 29 April 2021
Neosは現在、次のハードウェアで顔と目の追跡をサポートしています。
- Vive ProEye - アイトラッキング
- Viveフェイシャルトラッカー - フェイストラッキング
- これにはViveヘッドセットは必要ありません。 ユーザーはさまざまなヘッドセットとテープで成功を収めています。
これらのシステムのいずれかに問題がある場合は、以下の一般的なアドバイスを確認してください。
ハードウェア
- すべてが接続されていることを確認してください。不明な場合は、すべてのケーブルを抜いてから再度接続してください。 緑または青のライトがすべてのアイテムに表示されている必要があります。
- すべてのケーブルに損傷がなく、擦り切れたり、損傷したり、よじれたりしていないことを確認してください。
Vive Pro Eye以外のヘッドセットの場合、USB-C-USBアダプターが必要になる場合があります。 これは次のようになります:
Face Tracker Mounting
For non-vive headsets, users have been sharing all sorts of mounting options. A short list of these is supplied below for reference.
- Tape - Lots of tape and the Tracker sticks quite well. Any tape works.
- Double Sided Velcro Tape - This provides a removable mounting option. Make sure it is heavy duty so it can support the weight of the tracker and the movement of your head.
- 3D Printing
- Simple Mount - A simple mount that can be stuck to the bottom of the headset with tape.
- Friction Mount - A mount that uses friction/clips between the mount and the Valve Index Frunk. This can fail if you are moving your head around too vigorously.
- Magnetic Mount - Uses the existing Valve Index Frunk Cover's Magnets to stick to the headset. This one will require magnets with the following dimensions: 1/8" dia. x 1/8" thick. Stuck to the print.
ソフトウェア
ソフトウェアのインストール
顔の追跡と視線の追跡の両方で、HTCの同じソフトウェアが必要です。 ソフトウェアはHTCウェブサイトからダウンロードできます。 ダウンロードしたら、スタートメニューで見つけて実行してください。 インストールして実行すると、次のようなアイコン(タスクバーの右側にあるアイコン)がシステムトレイに配置されます。
このアイコンが表示された場合、通常、追跡は機能します。
追跡ステータス
アイコン(ロボット)は、追跡のステータスも伝えます。
- ロボットの目はアイトラッキングのステータスを示します
- ロボットの口にはフェイストラッキングの状態が表示されます
目や口の色は、何が起こっているかを示しています。
- 黒はトラッキングが非アクティブであることを意味します
- オレンジは、トラッキングがアイドル/スタンバイであることを意味します
- 緑は、トラッキングがアクティブであることを意味します
ウィンドウについて
ロボットアイコンを右クリックすると小さなメニューが表示され、[バージョン情報]を選択するとウィンドウが表示されます。 このウィンドウには、次のような追加情報が表示されます。
- ソフトウェアバージョン
- アイトラッカーバージョン
- フェイストラッカーバージョン
アイカメラまたはリップカメラの部分にN/Aが表示されている場合は、ソフトウェアがデバイスを検出できないことを意味します。ハードウェアのトラブルシューティング手順を確認してください。
ソフトウェアの現在のバージョンは、 '1.3.2.0' です。
アイタッキングキャリブレーション
Vive Pro Eyeは、目をできるだけよく検出するために、時折キャリブレーションが必要です。 これを行う方法については、HTC Vive Pro Eye Calibration を参照してください。
追加のソフトウェア/ハードウェアヘルプ
ViveヘッドセットとフェイシャルトラッカーはHTCによって製造されているため、独自のヘルプセクションとサポートシステムがあります。さらなるヘルプについては、HTCのリソースを参照してください。 sections and support systems. Please see their resources for additional assistance:
Neos
ソフトウェアとハードウェアがセットアップされると、Neosを実行できるようになり、すべてが正常に機能するはずです。 Neosが起動し、開始時のワールドで実行された後に。
アイトラッキングを使用している場合、ロボットの目は緑色になっているはずです。 フェイシャルトラッカーがある場合、ロボットの口は緑色になっているはずです。
次に、フェイス/アイトラッキング互換のアバターを装備してみてください。 フェイスボットは、Neos Essentials-> Avatars-> Face and Eye Tracking Readyにあります。 それは完全な機能を備えています。 装備して目と顔を動かしてみてください。
Neosの問題
Neosでトラッキングが機能していない場合。次のことを試してみてください:
- ロボットアイコンがシステムトレイにあることを確認する
- Neosの再起動
- コンピュータを再起動
-ForceSRAnipal
を コマンドライン引数 に追加する
それでも機能しない場合。いくつかのログを取得 して、Neos Discord内の#❓questions-help
で質問してください。
シェイプキーとセットアップ
アバターが機能したら、アバターの設定に関するガイドをご覧ください。 (これはまだありません。) TODO:これは書く必要があります。
This article or section is a Stub. You can help the Neos Wiki by expanding it.